Need help? Have a chat with one of our expert consultants to discuss the best solution for your interior design project.
Easy Textiles delivers NZ-wide
Call Us Today 0800 122 855
Need help? Have a chat with one of our expert consultants to discuss the best solution for your interior design project.
Easy Textiles delivers NZ-wide
| Colour | Ivory |
| Collection | Lining |
| Origin | Asia |
| Composition | 80% PL (PES), 20% CO |
| Width | 280cm / 110.2″ |
| Weight | 728.0g/m / 665g/yd |
| Colourfastness | UV 6/8 Blue Scale |
| Finishes | 3 Pass Blackout |
Do not bleach
Do not dryclean
Do not tumble dry
Dry flat
Hand wash only
Low iron max 110C
Warning: Avoid wet coated sides touching
We simply need the width and length in millimetres of the curtain you want Easy Textiles to make for you.
There are three mounting positions that determine where to take measurements.
Be aware of an obstructions to the curtain such as handles and winder and the like.
Measure the width of the frame from side to side at the top of the frame and where the bottom of the curtain will be in millimetres.
For two curtains add 50 – 100mm on each side to allow for stacking when the curtains are open
For one curtain 30 – 50 mm.
Measure in millimetres from the mounting position on the frame to where the bottom of the curtain will be. That is usually window or window sill or floor.
When the bottom of the curtain is on the window sill add 150 mm to minimise light seepage.
Measure the width of the frame from side to side at the top of the frame and where the bottom of the curtain will be in millimetres.
For two curtains add 50 – 100mm on each side to allow for stacking when the curtains are open
For one curtain 30 – 50 mm.
Measure in millimetres from the mounting position above the frame to where the bottom of the curtain will be. That is usually window or window sill or floor.
When the bottom of the curtain is on the window sill add 150 mm to minimise light seepage.
When mounting above the frame try to locate framing studs to screw into or when mounting when there is no framing stud use toggle screws.
To mount your blinds inside the frame as in Fig E the recess will need to be at least 45 mm deep all the way across.
If you are mounting the blind on the architrave itself (Fig.C) the blind will sit partially over the glass at the top.
Generally, for blinds mounted on the wall, it is best if the distance above the window includingthe top architrave is about 230mm. That will allow for the bottom of the folds to sit roughly on the bottom edge of the top architrave as in Fig A. It can be less if you do not have enough room above the window. Please let us know in that case.
If your sill sticks out at the side as in the diagram make sure the width you supply is 20mm wider than the sill (10mm each side).
If you cannot work out the size:
The Layered Stack finish protects the folded area from sun better if you are mounting on the frame or inside the frame. Please let us know which fold you prefer.
